Sawing
100% versatility: Our value proposition for sawing services
State-of-the-art technology for more efficiency
Our ultramodern machinery includes state-of-the-art sawing technology. With continuous investment in new saws, as well as regular maintenance and repairs, we ensure top performance and precision for all cutting processes. This enables us to offer custom solutions – from manufacturing precise work pieces with narrow tolerances to realizing cuts with different miter angles.
Our equipment
Working rage of the saw: 0°: 1,030 x 400 mm
+20°: 980 x 400 mm
-20°: 960 x 400 mm
+30°: 900 x 400 mm
-30°: 880 x 400 mm
+45°: 740 x 400 mm
-45°: 700 x 400 mm
+60°: 525 × 400 mm
Smallest material cross-section 20 x 10 mm
Working range of the drill:
min. 50 x 10 mm
max. 1,000 x 400 mm
Hole diameter 8–50 mm
It is not possible to drill holes in the radii of the work piece
Thread cutting M10–M30
Working range of the drill:
min. 50 x 10 mm
max. 1,000 x 400 mm
Hole diameter 8–50 mm
It is not possible to drill holes in the radii of the work piece
Thread cutting M10–M30
Contour marking for welding and assembly marks on 4 axes
Countersinks (outside) on 3 axes.
Milling of standard geometries with macro programming of circles, oblong holes and rectangles.
Minimum width/height of oblong holes 12 mm
Working range of the saw:0° : 400 x 350 mm
+20° : 400×350
-20° : 390×350
+30° : 380×350
-30° : 355×350
+45° : 315×350
-45° : 275×350
+60° : 225×350
Smallest material cross-section 10 x 10 mm
Length 40 – 5.750 mm
Working range of the saw:Round stock 90°: 12–153 mm
Round stock 45°: 12–145 mm
Square stock 90°: 12–140 mm
Square stock 45°: 12–125 mm
Flat stock 90°: 250 x 75 mm
Flat stock 45°: 180 x 70 mm
U-bars horizontal 90°: 240 x 85 mm
U-bars horizontal 45°: 180 x 70 mm
U-bars vertical 45°: 140 x 60 mm
Smallest material cross-section 6 x 6 mm
Length 20–6,500 mm
Working range of the drill:
Round stock: 20–150 mm
Square stock: 20–140 mm
Flat stock (width): 20–240 mm
Flat stock (height): 6–140 mm
Holes with diameters of 8–25 mm
It is not possible to drill holes in the radii of the work piece
Working range of the saw: 0°: 600 × 500 mm
+20°: 600 x 500 mm
-20°: 600 x 500 mm
+30°: 600 x 500 mm
-30°: 600 x 500 mm
+45°: 530 x 500 mm
-45°: 490 × 500 mm
+60°: 380 x 500 mm
Smallest material cross-section 20 x 10 mm
Length 1,600–15,000 mm
Working range of the drill:
min. 50 x 10 mm
max. 1,000 x 400 mm
Hole diameter 8–50 mm
Thread cutting M10–M30
Labeling only from the side:
Pipes with a wall thickness of 5–8 mm up to c. 150 mm width
Beams only in horizontal position
Flats from 25 mm thickness
Countersinks (outside) on 3 axes
Milling of standard geometries with macro programming of circles, oblong holes and rectangles.
Minimum width/height of oblong holes 12 mm
Round pipes cannot be processed.
Matching products
Write to us
Stay up to date with the Kerschgens newsletter
