Thread cutting
100% precise: Perfect thread cutting
Custom-fit results with every process step
Precisely cut threads for screw connections ensure stability and a perfect fit.
Kerschgens uses an ultramodern drill to cut helical grooves into metal work pieces. The resulting thread allows for precise fastening of screws or bolts. Thread cutting requires special know-how: To produce high-quality threads, it’s important to choose the right tools and cutting speeds.
Our equipment
Plate width: 220–2,500 mmLength: 500–6,000 mm
Thickness: 6–60 mm
Unit weight max. 7,000 kg
Prefabricated plates:
Width 60–2,460 mm
Length 60–4,700 mm
Drilling 6–50 mm diameter
We also drill checker plates.
Thread cutting M8–M30
We also offer thread cutting for checker plates.
Countersinks 8–31 mm diameter
We also offer countersinking for checker plates.
Marking unit for labeling components with item numbers.
Labeling is not possible on checker plates.
Contour marking for welding and assembly marks
Working range of the flame-cutting robot:Width x height: 1,200 x 400 mm
Oxy-fuel cutting
Chamfer angle max. 45°
Working range of the drill:
min. 50 x 10 mm
max. 1,000 x 400 mm
Hole diameter 8–50 mm
It is not possible to drill holes in the radii of the work piece
Thread cutting M10–M30
Contour marking for welding and assembly marks on 4 axes
Countersinks (outside) on 3 axes
Working rage of the saw: 0°: 1,030 x 400 mm
+20°: 980 x 400 mm
-20°: 960 x 400 mm
+30°: 900 x 400 mm
-30°: 880 x 400 mm
+45°: 740 x 400 mm
-45°: 700 x 400 mm
+60°: 525 × 400 mm
Smallest material cross-section 20 x 10 mm
Working range of the drill:
min. 50 x 10 mm
max. 1,000 x 400 mm
Hole diameter 8–50 mm
It is not possible to drill holes in the radii of the work piece
Thread cutting M10–M30
Working range of the drill:
min. 50 x 10 mm
max. 1,000 x 400 mm
Hole diameter 8–50 mm
It is not possible to drill holes in the radii of the work piece
Thread cutting M10–M30
Contour marking for welding and assembly marks on 4 axes
Countersinks (outside) on 3 axes.
Milling of standard geometries with macro programming of circles, oblong holes and rectangles.
Minimum width/height of oblong holes 12 mm
Working range of the saw: 0°: 600 × 500 mm
+20°: 600 x 500 mm
-20°: 600 x 500 mm
+30°: 600 x 500 mm
-30°: 600 x 500 mm
+45°: 530 x 500 mm
-45°: 490 × 500 mm
+60°: 380 x 500 mm
Smallest material cross-section 20 x 10 mm
Length 1,600–15,000 mm
Working range of the drill:
min. 50 x 10 mm
max. 1,000 x 400 mm
Hole diameter 8–50 mm
Thread cutting M10–M30
Labeling only from the side:
Pipes with a wall thickness of 5–8 mm up to c. 150 mm width
Beams only in horizontal position
Flats from 25 mm thickness
Countersinks (outside) on 3 axes
Milling of standard geometries with macro programming of circles, oblong holes and rectangles.
Minimum width/height of oblong holes 12 mm
Round pipes cannot be processed.
Matching products
Write to us
Stay up to date with the Kerschgens newsletter
